Skip to content
LaserNet

One beam for every finish

What you see is the shape of the laser beam. We set its shape and strength to the finish you need: from gentle cleaning that keeps the surface intact to an anchor profile before painting.

The finish you specify. Measured.

Laser cleaning machines chosen by the result your surface needs. Every recommendation is backed by a Laser Lab report.

Find your laser.

Two families, built in-house. Pulse for a controlled finish, continuous for speed on large surfaces.

Pulse series

Cleaning and surface preparation with a controlled finish.

Pulse laser in a carry case, with its cleaning head
Optical fibre
3 to 25 m
Power supply
120 V or 240 V, depending on the model
  • Pulse 200200 W
  • Pulse 300300 W
  • Pulse 500500 W
  • Pulse 10001 000 W
  • Pulse 20002 000 W
Specifications
  • Pulse 200
    Supply
    120 V
    Cooling
    Air
    Format
    Portable
    Scan width
    5 - 141 mm
  • Pulse 300
    Supply
    120 V
    Cooling
    Air
    Format
    Suitcase or backpack
    Scan width
    5 - 141 mm
  • Pulse 500
    Supply
    240 V
    Cooling
    Air
    Format
    Suitcase
    Scan width
    10 - 200 mm
  • Pulse 1000
    Supply
    240 V
    Cooling
    Water
    Format
    Wheeled
    Scan width
    10 - 300 mm
  • Pulse 2000
    Supply
    On request
    Cooling
    On request
    Format
    On request
    Scan width
    On request

Continuous series

Fast rust removal on large surfaces.

Continuous laser on wheels
Optical fibre
10 to 25 m
Heads
Single or double action, single or multi-mode
Power supply
240 V up to 2 kW, 380 V from 3 kW
Wire feeder
Single or double motor
  • LTC 10001 000 W
  • LTC 15001 500 W
  • LTC 20002 000 W
  • LTC 30003 000 W
  • LTC 60006 000 W
Specifications
  • LTC 1000
    Supply
    240 V
    Cooling
    Air
    Format
    Wheeled
    Scan width
    5 - 300 mm
  • LTC 1500
    Supply
    240 V
    Cooling
    Air
    Format
    Wheeled
    Scan width
    5 - 300 mm
  • LTC 2000
    Supply
    240 V
    Cooling
    Air or water
    Format
    Wheeled
    Scan width
    5 - 300 mm
  • LTC 3000
    Supply
    380 V three-phase
    Cooling
    Water
    Format
    Workshop
    Scan width
    5 - 300 mm
  • LTC 6000
    Supply
    380 V three-phase
    Cooling
    Water
    Format
    Workshop
    Scan width
    5 - 300 mm
Request a callback

Full sheet and pricing on request.

What each type of laser does.

Pulse

Energy arrives in very short pulses. The surface is cleaned or textured with little heat going into the part. It is the choice for a controlled finish.

Continuous

The beam heats without interruption. It quickly removes heavy rust and thick layers on large surfaces, with more heat going into the part.

Pulse or continuous, at a glance

Finish quality
Pulse8.6
Continuous3.6
Machine price
Pulse8.6
Continuous3.3
Heat passed into the part
Pulse2.6
Continuous7.6
Speed on large surfaces
Pulse2.1
Continuous8.6

Scores from 0 to 10, from our experience. For price, a high score means a more expensive machine.

Best for: Pulse

  • Finishing products
  • Car bodies
  • Graffiti
  • Wood varnish
  • Soot after a fire
  • Oil and grease
  • Mill scale removal

Best for: Continuous

  • Rust removal on large surfaces
  • Mill scale removal before painting or welding
  • Oil and grease
  • Top layer of concrete

One pulse. From very gentle to very aggressive.

A pulse laser is more than its wattage. Depending on the model, the pulse cleans without touching the metal, or marks it enough to create an anchor profile. We manage the pulse for you: you describe the finish, we select the model that delivers it.

GentleThe original surface is preserved.
AggressiveThe metal is marked, a profile is created.

Choose by result.

Tell us what the surface has to become. Laser Lab treats a sample, measures the finish obtained and hands you a report. You pick the machine with numbers in hand.

Paint prep

A coating holds on a precise anchor profile. The report gives the surface profile obtained, in mils and microns, against the range your coating calls for.

What the report contains
  • Surface profile in mils and microns
  • At least 10 readings per area: mean, minimum, maximum, standard deviation
  • Before and after photos
  • Readings from professional measuring instruments
  • Pass or fail verdict against your target range
Pulse energy
Aggressivity

Aggressive: marks the metal

Spot sizeSmall / Large
Laser pass, seen from above

Indicative demonstration, with no setting values. The real setting is established by the Laser Lab trial.

Applications

What our lasers remove or prepare, with no abrasive or chemicals.

Paint and coatings

  • Paint removal
  • Preparation before painting
  • Wood varnish
  • Graffiti and marker
  • Printed text

Rust and mill scale

  • Light, commercial or industrial rust removal
  • Surface or deep rust
  • Mill scale removal
  • Trailer maintenance

Welding

  • Weld seam cleaning
  • Preparation before welding

Contaminants

  • Oil and grease
  • Soot after a fire
  • Mould

Sectors and materials

  • Non-porous stainless steel for food
  • Vehicle bodywork
  • Auto parts
  • Plastic and rubber
  • Antique restoration
  • Top layer of concrete
  • Industrial maintenance

Our departments.

We build our lasers from scratch, then we prove what they do.

Assembly

Every laser is assembled in-house, from scratch.

  • Built from scratch in our shop
  • All our machines meet CSA approval standardsCSAUL
Some of the parts we fit
Key switch
Emergency stop button
Push button
Illuminated push button
3-pole fuse holder
DIN rail fuse terminal
Class CC fuse
Class J fuse

Custom design

Our 3D design department: we draw your project, then bring it to life in our shop. It completes our laser offer.

  • 3D design and renderings
  • Transport cases
  • Laser housings and enclosures
Transport case on wheels, open: the laser, its fibre and accessories neatly stored
Open: everything has its place
The same case closed, in Hydro-Québec and Groupe LaserNet colours
Closed, ready to go. Designed for Hydro-Québec

Laser Lab

The department that turns a trial into numbers.

  1. 1You send us a sample of the part.
  2. 2We treat the surface with the candidate models.
  3. 3We measure the finish and document every step.
  4. 4You receive a report and a model recommendation.

Surface profile measured with an Elcometer 224 gauge. Photos help prepare the trial, but measuring requires a sample.

Report SP-YYYYMMDD-NNSample, fictional data
Mean
53.2µm
2.1 mil
Minimum
51 µm
2.0 mil
Maximum
56 µm
2.2 mil
Range
5 µm
0.2 mil
Std deviation
1.6 µm
0.1 mil
Measurement plan
Individual readings
  • Before
  • After
  • Readings from professional measuring instruments

Portfolio

Unstaged videos: a laser, a surface, then the numbers from the report.

Video slot

Rusted steel

Rust removal

Video slot

Painted steel

Coating removal

Video slot

Mill-scaled steel

Paint prep

Request a callback

Describe the part and the finish you are after, attach photos. We call you back.

Photos

Up to 5 photos, 10 MB each. JPG, PNG, WEBP or HEIC.

Your details are used only to call you back.

Our partners.

4JET lasers

The mobile JETLASER from our partner 4JET, with its technical documents.

JETLASER, 4JETPhoto: 4JET

JETLASER

Manual, mobile 1,000 W laser cleaning system with a 15 m fibre. It removes rust, paint, coatings, grease and soot, with no contact and no chemicals.

See at 4JET